Winterizing Your Rig: The Checklist I Give Every Contractor

October 13, 2026•1 min read

Cold weather doesn't ruin spray foam and blowing equipment overnight — it finds whatever you didn't maintain over the summer and makes it worse, fast.

The checklist I give every contractor heading into winter: flush and check heater hoses before temperatures drop, since cold makes any existing wear fail sooner. Check proportioner calibration — temperature swings throw it off more than people expect. Drain anything that holds moisture that could freeze overnight if the rig sits. And check seals and gaskets specifically — cold makes brittle material crack that would've held fine in warmer weather.

None of this is complicated. It's just the stuff that's easy to skip when you're still working full days and the temperature hasn't dropped low enough yet to feel urgent. By the time it feels urgent, you're usually already dealing with a failure mid-job.

Doesn't matter which brand of rig you're running — this checklist applies across the board. I'm not selling you anything with this one, just trying to save you a January service call you didn't need to have.

If your rig's giving you trouble as the weather turns, tell me what's going on and I'll help you figure out if it's a quick fix or something that needs a real look.

blog author avatar

Mike David

Mike David is a Golden Valley, AZ-based sales professional working in tools and equipment, equipment financing referrals, and real estate.

Back to Blog

Get Mike's Tips on Tools, Financing & Real Estate