If you've been thinking about adding spray foam to your service list — without taking on a full-size rig and everything that comes with it — this is worth a look.

We now carry the Foam Titan Professional Spray Foam Machine, a compact, bulk-drum spray foam system built in Southern Oregon for contractors who want repeat, lower-volume spray foam work without the entry cost of a dedicated high-output crew setup.

What it does. Foam Titan runs two-component open-cell or closed-cell spray foam from matched A-side and B-side 55-gallon drums, on standard 115/120V power. It pairs a heated hose with a low-pressure spray gun and rebuildable gear pumps, so you get professional material handling in a package sized for a van, trailer, or shop — not a generator-dependent full rig.

The numbers:

• Rated output: 10–12 lb/min

• - Operating pressure: 200–900 PSI

• - Power: 115/120 VAC, 60Hz, dedicated 20-amp circuit

• - Heated hose: 50, 100, or 150 feet

• - Machine footprint: 25 x 25 x 32 inches, 140 lb with hose and gun

• - Yield: up to 4,400 board feet per day from one matched 55-gallon set (about 2,200 board feet at 2-inch application — actual yield depends on formulation, thickness, and field conditions)

• - Compatible with open-cell (0.5 lb density) and closed-cell (2.0, 2.5, 3.0 lb density) foam, 1:1 mix ratio

• - 1-year limited warranty

What's included: the machine, a 50-foot heated hose, spray gun, drum feed kit, solvent flush kit, tip package, and operator manual. Longer hose options and freight are quoted based on where the job is and what you need — typical lead time is 2 to 3 weeks from deposit.

Who it fits: insulation and weatherization contractors, HVAC contractors adding air-sealing work, builders and remodelers bringing foam work in-house, roofing, post-frame, and ag-building contractors, and modular shops spraying in a controlled space. If you're running several chemical sets a day already, this isn't the machine — that's a full-size rig conversation. If you're adding foam as a service alongside what you already do, this is built for exactly that.

Every setup is a little different — contractor type, application, expected job volume. Give Mike a call and he'll walk through your situation and put together a quote that actually fits it.

Call Mike at (480) 710-2614 for setup guidance and a quote.